BEHR® Microlon®
Roller Covers
BEHR® Microlon® rollers combine the high carrying capacity of a traditional microfiber roller and the ultra-smooth finish of a traditional woven roller. Specifically engineered to use with all paints and stains on smooth to semi-smooth surfaces. Rollers are constructed with a double-thick polypropylene core that resists water, solvents, and cracking.
Click Here to find out if BEHR Microlon rollers are available in a Home Depot® nearest you.
Finish
Resists shedding for an ultra-smooth finish.
Best For Use In
7/16-inch nap is ideal for walls, ceilings, and floors with smooth to semi-smooth surfaces.
Coverage
Holds more paint for excellent coverage.
PRODUCT USAGE
- Pre-wet roller cover before use. This will help prime the roller for paint and remove any loose fibers from the roller cover. To pre-wet, dip roller cover into a water-filled bucket or lightly run it under the sink. Attach it to your paint frame and spin out the water until the roller cover is slightly damp. Always pre-wet roller covers with the same type of liquid you use on your project. Pre-wet with water for water-based coatings and pre-wet with mineral spirits for oil-based coatings.
- To load, firmly roll the roller into the well of the paint-filled tray and back to the roll off area. Repeat this back and forth motion until the roller is sufficiently coated and just short of dripping.
- To paint, begin in corner, by making a “V” figure 1 ½ feet by 2 feet. Go back and fill in “V”, then continue working from dry into wet areas. While painting, maintain a wet edge and apply minimal pressure to the roller to ensure the roller does not dry out.
- Once a section is complete, lightly back roll to lay off the paint and create a consistent finish across your project.
To Clean:
- Remove cover from frame immediately after use.
- WATER-BASED PAINTS: Wash in warm soapy water, rinse, dry.
- OIL-BASED PAINTS: Rinse in recommended solvent. Wash in warm soapy water, rinse, dry. DO NOT SOAK IN WATER OR SOLVENT.
Read More
Specifications:
- Roller Length: 9"
- Nap Size: 7/16"
- Fabric Type: Microfiber
- Surface Type: Smooth & Semi-Smooth
- Ideal Projects: Walls, Ceilings & Floors
- Paint Type: All Paints & Stains
Read More
Read More
Reviews
Often Bought Together
How-To
Find step-by-step instructions in our how-to articles and videos.
