previous page Back
Close up image of a surface with unsightly brush and roller marks.

POOR FLOW & LEVELING – INTERIOR/EXTERIOR

Failure of paint to dry to a smooth film, resulting in unsightly brush and roller marks after the paint dries.

Causes

  • Use of low-quality paint.
  • Use of the wrong type of roller cover or poor quality brush
  • Re-brushing or re-rolling partially dried painted areas.
  • Application under high temperature conditions – usually above 90 ºF – or too little humidity, which causes rapid drying of the paint, preventing the film from flowing out properly.

Solutions

  • Use high- quality latex paints, which are generally formulated with ingredients that enhance flow and leveling properties.
  • When using a roller, be sure to use a cover with the recommended nap length for the type of paint being used. The use of a high-quality brush is important; a poor brush can result in bad flow and leveling with any paint.
  • Avoid conditions that promote rapid drying of the paint.

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133 ext. 2
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
$0.00
The Home Depot logoSold Exclusively at The Home Depot