previous page Back
Close up image of a surface where the paint film was scrubbed with a brush, sponge or cloth.

POOR SCRUB RESISTANCE - INTERIOR

Wearing away or removal of the paint film when scrubbed with a brush, sponge, or cloth.

Causes

  • Choosing the wrong sheen for the area.
  • Use of a lower quality paint.
  • Use of an overly aggressive scrub medium (see Burnishing).
  • Inadequate dry time allowed after application of the paint before washing it.
  • Application of the paint in too thin a cost.

Solutions

  • Areas that need frequent cleaning require a high-quality paint formulated to provide such performance.
  • High traffic areas may require a higher sheen paint (e.g. eggshell, satin or semi-gloss) rather than a flat paint to provide good scrub resistance.
  • Allow adequate dry time, as scrub resistance will not fully develop until the paint is thoroughly cured. Typically, this will two to four weeks.
  • Always clean the painted surface with the least aggressive method first - least abrasive material and mildest detergent. Avoid harsh cleaning agents that contain chemicals/solvents that can permanently damage the paint film.

READY TO GET STARTED?

Contact a Behr Pro Rep Icon

CONTACT A BEHR PRO® REP

Your reputation depends on your ability to do the job right. BEHR can help.

Find a rep
Technical Services Icon

TECHNICAL SERVICES

1-800-854-0133 ext. 2
Mon - Fri, 6am-5pm PST
Sat, 7am-3:30pm PST
Sun, Closed

PRO XTRA logo

JOIN THE HOME DEPOT® PRO XTRA LOYALTY PROGRAM

Save up to 20% OFF
BEHR® Paints, Stains & Primers.

sign up on homedepot.com
CUSTOMIZE & BUY
Tahitian sky
Small Behr logoS480-5
Compare
BLACK
BLACK
What Sheen Do I Need?
8 Oz. Sample
1 Gallon
1 Quart
5 Gallon
The following product(s) is required to properly prep and pre-treat wood prior to any stain project.
Required product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
$0.00
The following product(s) is required to properly prep and pre-treat wood prior to any stain project. Only available in store at Home Depot.
Required 3rd party product
BEHR PREMIUM ALL-IN-ONE WOOD CCCC
The 9 in. x 1/4 in. Polyester Adhesive Roller Cover has a hard texture, making it ideal for applying all types of adhesives to smooth surfaces. It can be used for stippling and applying sand paints.
The following product(s) is recommended when stripping is needed.
$0.00
The Home Depot logoSold Exclusively at The Home Depot